PLX SPECIFICATIONS |
PLX3002 |
STEREO MODE, Both Channels Driven |
8 ohms 20 Hz-20 kHz 0.03% THD
|
550W |
4 ohms 20 Hz-20 kHz 0.05% THD
|
900W |
2 ohms 1 kHz 1% THD |
1500W |
BRIDGE MONO MODE |
16 ohms 20 Hz-20 kHz 0.1% THD
|
1100W |
8 ohms 20 Hz-20 kHz 0.1% THD
|
2000W |
4 ohms 1 kHz 1% THD
|
3000W |
Signal to Noise (20 Hz-20 kHz) |
<-107 dB |
Input Sensitivity @ 8 ohms
|
1.7Vrms |
Input Sensitivity @ 4 ohms |
1.5Vrms |
Voltage Gain
|
40x (32 dB) |
Output Circuitry
|
2-Step Class H |
Power Requirements (1/8 Power Pink Noise @ 4 Ohm)
|
10A |
ALL MODELS |
Distortion (SMPTE-IM)
|
Less than 0.01% |
Distortion (Typical) - 20 Hz-20 kHz: 10 dB below rated power - 1.0 kHz and below: full rated power
|
Less than 0.01% THD Less than 0.01% THD |
Frequency Response |
20 Hz-20 kHz, +/- 0.2 dB / 8 Hz-50 kHz, +0, -3 dB |
Damping Factor
|
Greater than 500 |
Input Impedance
|
6 k ohms unbalanced, 12 k ohms balanced |
Input Clipping
|
10 Vrms (+22 dB) |
Cooling
|
Variable-speed fan, rear-to-front air flow |
Connectors, each channel
|
Input: 3-pin XLR & 1/4" TRS balanced Output: Neutrik Speakon(TM) and touch-proof binding posts |
Amplifier Protection
|
Full short circuit, open circuit, thermal, ultrasonic, and RF protection Stable into reactive or mismatched loads |
Load Protection
|
On/off muting, DC-fault power supply shutdown |
Dimensions
|
19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces) 13.25" (33.7 cm) deep (from front mounting rails) |
Gain
|
40x (32 dB) |
Weight
|
21 lb (9.5 kg) net, 27 lb (12.3 kg) shipping |