|
PLX SPECIFICATIONS |
PLX2402 |
|
STEREO MODE, Both Channels Driven |
8 ohms 20 Hz-20 kHz 0.03% THD
|
425W |
4 ohms 20 Hz-20 kHz 0.05% THD
|
700W |
| 2 ohms 1 kHz 1% THD |
1200W |
|
BRIDGE MONO MODE |
| 16 ohms 20 Hz-20 kHz 0.1% THD |
850W |
| 8 ohms 20 Hz-20 kHz 0.1% THD |
1500W |
4 ohms 1 kHz 1% THD
|
2400W |
| Signal to Noise (20 Hz-20 kHz) |
<-108 dB |
Input Sensitivity @ 8 ohms
|
1.5Vrms |
Input Sensitivity @ 4 ohms
|
1.3Vrms |
Voltage Gain
|
40x (32 dB) |
Output Circuitry
|
2-Step
Class H |
Power Requirements
(1/8 Power Pink Noise @ 4 Ohm)
|
8A |
|
ALL MODELS |
| Distortion (SMPTE-IM) |
Less than 0.01% |
|
Distortion (Typical)
- 20 Hz-20 kHz: 10 dB below rated power
- 1.0 kHz and below: full rated power |
Less than 0.01% THD
Less than 0.01% THD
|
Frequency Response
|
20 Hz-20 kHz, +/- 0.2 dB / 8 Hz-50 kHz, +0, -3 dB |
Damping Factor
|
Greater than 500 |
Input Impedance
|
6 k ohms unbalanced, 12 k ohms balanced |
Input Clipping
|
10 Vrms (+22 dB) |
Cooling
|
Variable-speed fan, rear-to-front air flow |
Connectors, each channel
|
Input: 3-pin XLR & 1/4" TRS balanced
Output: Neutrik Speakon(TM) and touch-proof binding posts |
Amplifier Protection
|
Full short circuit, open circuit, thermal, ultrasonic, and RF protection
Stable into reactive or mismatched loads |
Load Protection
|
On/off muting, DC-fault power supply shutdown |
Dimensions
|
19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces)
13.25" (33.7 cm) deep (from front mounting rails) |
Gain
|
40x (32 dB) |
Weight
|
21 lb (9.5 kg) net, 27 lb (12.3 kg) shipping |
